Tree Pruning 10 Best Steps How Care a Tree

AAA Trees on July 15, 2020

Tree pruning 10 best practices on tree care

Pruning has been called “truly outstanding, worst maintenance practices” performed on tree care.

There has been a lot of research data shared and discussed that supports the idea that it is most beneficial to prune trees of all species in the torpid season (winter). So most practicing arborists will agree that winter is the best time to prune.

There are also many reasons for this, but since there is such an awesome consensus on the issue I think this discussion should be progressively how the trees should be pruned.

Granted that, the most widely recognized tree care practice is pruning, speaking around 60% to 70% of daily operational activities in urban forestry. As climate change increases the frequency and intensity of storms, residents may turn out more likely to prune their trees also.

What are the best tree pruning practices?

There are top 10 tree pruning practices on tree care.

1. Safety pruning

In general leaders and branches are more or less prone to failure because of their angle of growth from the parent stem. Steep angles sometimes referred to as co-dominant – have a more prominent potential for failure.

Safety pruning should be focused on the reduction or elimination of these kinds of branches and leaders. Simply removing the tops from heads does not achieve safety for the same reason mentioned above in the case of pruning live limbs for clearance. The possible development of the leader in the form of water sprouts just makes the situation worse.

2.Proper structural pruning

It is the best pruning practice for tree longevity as well as probably the most overlooked approach by customers and so-called tree care experts. Since most site conditions in an urban area allow for more light to your tree than it was in the forest, your tree grows much differently than its natural structure. Popper development growth for your tree from the tree foundation is significant for the health of your tree later in life, especially in the context of storm damage prevention.

Few steps to proper structural pruning including:

Choosing the branch that will be the prevailing trunk
Classify branches that will be competing with the leading trunk
Shortening or removing the branches

3.. Crown raising

Raising intends to “raise the crown” which frequently implies clearing some of the lower branches. To avoid leaving wounds or marks, the regular raising of the canopy should occur on younger trees.

The explanation behind raising is to accommodate more urban environments. It is commonly implemented when tree appendages get in the way of structures or individuals. The ideal clearance for structures is 10′-15′.

4. Crown Reduction

Crown reduction decreases the overall size of the tree and is normally an endeavor at making a too-large tree fit into its location. Frequently, this is the result of an ineffective place.

Tree in a location that cannot allow natural, growth. Crown reduction is another advanced pruning practice that typically requires a talented arborist.

5. Crown cleaning

It focuses on diminishing tree hazards and improving appearance. The process involves pruning to expel dead, dying, diseased, broken or poorly attached branches; crossing or rubbing branches; and, maybe, adventitious shoots, if excessively various.

The essential goal is removing non-useful plant parts, but minimal live tissue. This is a common pruning practice that not only improves the appearance as well as improves tree health.

6. Reduction pruning

Reduction pruning is regularly used for improving branching structure, growth, removing branch defected, or decreasing plant size. Concentrate on cuts that leave the smallest cut diameter to encourage faster wound recovery. This is a favored technique of reducing risk by shortening branches with large aspect ratios.

We can save your tree’s natural form but perform the necessary cuts to keep your tree healthy and practicable.

7. Canopy thinning

This is regularly performed on overgrown trees. Frequently, thinning is important for tree structural reasons. Likewise, expanded light penetration to support your grass or other plants grow is often a reason type of tree trimming. The best practice is to not remove over 15%-20% of the foliage on the tree and one should just be cutting branches that are 2 inches thick.

8. Removal of deadwood

Deadwood eventually falls from a tree if it is not removed first, presenting a risk to anyone and anything below it. More danger yet, dead wood tends to fall from

weather days rather than in storms, so the risk of it falling on people is greater than we may think.

Generally speaking, dead wood should be cut back to where there is live tissue and in a way that promotes the growth of live tissue over the wound. A certified arborist will know where best to make a slice to promote the quickest mending.

9.Removing live limbs from the tree

This is the best practice to remove branches that are in the way of something. Maybe satellite reception is poor due to an obstructing limb, or a view is obstructed, a light is covered, a branch is rubbing a building, etc.

When pruning to moderate these issues, we are most often removing live limbs from a tree. When we do this we should take care of the tree to make cuts that will heal and leave a proper terminal branch to the leader that is cut.

10.Tree pol larding

Pol larding is a pruning practice that keeps trees and shrubs smaller than they would naturally grow. It encourages the tree to grow regularly so you can maintain a supply of new wood for various purposes.

Pol larding usually starts on a young tree, and the process is reaped every year or two throughout the life of the tree.

Conclusion

Trees trimming is an important part of maintaining a property. However, how they are trimmed is critical to achieving positive results. We can do more damage than good if we do not understand the science behind the practice. So consult a tree care professional and check his or her credentials so you can understand the best practices as they relate to your trees.

[button link=”https://aaatreeserviceny.com/free-estimate/” type=”big” color=”green”] Free Tree Service Estimate [/button] and 516-9031082 – 631-9931039

Landscaping Design – Landscaping Ideas

AAA Trees on May 8, 2020

Landscaping Design and Garden-landscape. Ideas

Updating the designs and patterns of your house’s garden and the landscape is one of the best methods to boost the property value of your house. Landscaping spaces and garden areas work like a relaxing and entertaining booth for you in your house. No matter, if you want to increase the curb appeal of your backyard or want to redesign the back garden with dining, chairs, or entertainment area, there are many important and silent features to consider in landscape ideas and

garden designs

Are you looking for new, cool, easy DIY and unique landscaping and garden designs? If yes then you might have come to the right place, because we will help you to understand what type of garden design is best for you. With many suitable accessories to various plant species, with our landscaping and garden designs, you can easily create a relaxing atmosphere in your house.

From small trees

to water fountains, from colorful flowers to small stony pathways, there are lots of important elements that help you to convert your garden into a comforting section.

In this small but informational

guide, we have covered all the important points and designs of landscaping and gardens. No matter, what is your taste or what type of gardens and landscaping spaces you like, there is always one design that is made up for you. Stick with this article and learn all the important points you should keep in mind before going for any landscaping or garden idea.

Things To Keep in Mind Before Any Landscape or Gardening Design

Do you want to remodel the outdoor space of your house? If yes then you must have a beautiful and outstanding landscape or garden design in your mind. If you want to convert your dream into reality then you must have to focus on some important points such as climate in your area, available outdoor space, and design. There are some important points that you should keep in mind or significant to discuss with your landscape or garden designer.

Patience

You never know how much time a landscaping and gardening design will take to complete. So have patience is the most crucial key. As compared to small gardening or landscaping spaces, bigger designs also take 1 month or more to complete. But be patient because, in the end, your all hard work will pay off in a very beautiful way.

Trust Yourself

No one can design your outdoor garden and landscape space better than you so always believe your instincts. Don’t be afraid to pull the trigger in achieving the dreaming design of your garden.

Work on Pergolas

If you are making pergolas or arbors in your landscape or gardening space then you must consider 2 points such as

Pergolas should be tall enough so no one can hurt by hitting their head with it.
Short pergolas will make your whole gardening structure to fall.Keep Your Preferences First

Keep your preferences first because it is you who is going to use the landscaping and gardening outdoor space. So, it is very important to clear and put your preferences in front.

Consider Your Style

It is important to choose an appropriate gardening and landscaping style. This will help you to easily go with your desire products. Various designs can set your outdoor spaces on fir. But keep in mind that not all styles can fit in your budget.

Creative & Breathtaking Gardening and Landscaping Designs

No matter, if you want to create a brand new garden or landscape or want to retouch your old one, it is not a bad thing to go with many creative and unique things. With the below-mentioned creative and unique landscaping and gardening designs, you can let your designing dreams and imagination shine.

Let’s have a look at landscape designs and garden ideas that are not only creative but also fits in your tight budget.

Small Space Gardening or Landscaping Design

Making things prominent and most out of small outdoor places is a tricky task. Designing and decoration are not reserved only for large outdoor and landscaping spaces. You can still show your creativity with your small gardening area. Design a small landscape or gardening area by using beautiful flowers (that you like the most), place some pots, and arrange chairs and tables and you are all ready to enjoy your relaxing evenings. Tree planting service New York

Modest & Amazing Oasis Landscaping or Gardening Spaces

Design your garden or landscape by utilizing whatever ideas running in your mind. Don’t be afraid to break boundaries, it is not necessary to follow rules all the time. Don’t hesitate to push your creativity button. Use your mind and arrange different decorating items (arrange sitting area, pathway with colorful stones, plant pots, and variety of flowers) in your outdoor space.

Backyard Garden or Landscape

Let’s embrace the outdoor/indoor lifestyle and convert your backyard into embracing and comfortable landscape or gardening area.

Backyards are perfect for creating comfy landscape spaces where you can enjoy all entertainment with your family and friends. You can add many different features in your backyard for example small kitchen, pool, and fire gadgets. Moreover, create an attractive, fresh, and lush green garden that allows you to feel relax and comfy.

Small City Landscaping Design

When going for a gardening design, it is important to think about elements that can enhance the overall look of your garden. Let’s isolate your patio space into a beautiful lawn by planting beautiful roses. With a perfect height pergola, bunch flower plants, comfortable sitting area and you are all ready to show your small city landscaping or gardening space to your friends.

Garden Design or an Extension Room

With perfect flooring, you can convert your small gardening space into a perfect lodge or in a perfect extension room. For creating calm and peaceful feelings, make sure you have decorated all the available space with flowers and plants. This small landscaping or gardening space is best for entertainment, enjoying with family or friends, and spending some time alone and feel relaxing.

Pick up all your guest list and be ready to chill with your friends in your new creatively design gardening space.

Backyard Garden Design

No matter, if you are living in the countryside or not, you can still convert your backyard into a perfect landscape or gardening space. No matter, how large or small it is your backyard; imagine it as an empty canvas. Now it is the time to fill colors in your backyard. Don’t bound your creativity and make the most out of your gardening design.

Plant lots of flower pots, make a comfy and relaxing sitting area, a perfect pathway, a suitable pool space, and perfect height pergolas, these are the important elements that you should create in your new backyard gardening design.

Layout Garden or Landscape Design

Give a unique touch of indoor and outdoor design by adding a perfect shelving layout and sitting area in your gardening or landscaping design. A combination of tiles on the floor and greenery around the area will give you some solid relaxing and peaceful vibes.

Fantasy Garden design Long Island NY

It is the time to give your fantasies a look with amazing gardening design. From arranging flower pots on shelves to an amazing outdoor kitchen, with little effort and creativity, you can give your imaginations a real look.

Wildlife Gardening Design In Long Island New York

From classic designs to some chic ones, there are lots of landscaping or gardening ideas that you can select. If you love wildlife then it is the time to show your love by resetting your old garden design.

Arrange bushes in your garden with some colorful flowers and a perfect small pathway, it will easily catch the attention of insects (like butterflies), some mammals and birds.

Mesmerizing Outdoor Space

As it is already mentioned, there are various elements to keep in mind while creating a gardening or landscape design. Use your imagination and create and build a mesmerizing landscaping r gardening space. Add suitable patio and decks because it gives a very fascinating look to your garden.

Make sure your pathways are wide enough for people to walk easily. Moreover, make sure your landscaping or gardening design has enough space to arrange sitting and dining for your family and friends.

Modern Landscaping or Gardening Design Long Island NY

In today’s advanced world where all of us are trying to become mode, it is necessary to give a boost to your gardening designs also. Let’s develop a love for nature and modernize your gardening space. Make a small yet comfortable sitting area inside, make a perfect grass floor, add lots of lighting, arrange pots and plants on sides of your pathways and your modern gardening design is all-ready to show your guests and friends.

Garden with Mix Plants Long Island NY

The most healthy and attractive gardening designs are those that come up with a mix of plants. There is a certain plant combination that promotes health, vitality, and immune. Use brilliant and wise pairing of vegetable and fruit plants that will not only boost your gardening design but also maintain its best possible shape. landscaping and sod inhalation Long island NY

Apart from all the above-mentioned gardening or and landscaping designs, you can also take your gardening spaces to a higher extent with an eco-friendly gardening area.

Final Thoughts

Not all the landscaping designs and gardening ideas discussed in this article are expensive or make your pocket empty. Some of them are budget-friendly, now it all depends on you how you utilize these landscape or gardening ideas to convert your outdoor space

Contact Us 516-9031082 and 631-9931039

Shrub and Tree Trimming & Pruning Services

AAA Trees on May 3, 2020

10 Steps of Shrub and Tree Trimming and Pruning Services

Pruning your scene shrubs and trees is the best thing you can do for plant wellbeing, however most property holders neglect or stay away from it.

Numerous landowners don’t have time, don’t have the information, don’t believe it’s important, or are scared of harming their trees and shrubs.

Pruning isn’t unsafe or as difficult as many people think. There are really few risks to your trees and bushes, however, the rewards to them are critical.

With the right techniques and tricks, the correct gear, and proper trimming and pruning services, using great tips, your trees and shrubs will produce more limbs, greener, thicker foliage, and more sprouts during their development season.

1. Reasons for trimming and pruning

To prepare a plant
To maintain plant wellbeing
To improve the nature of tree, organic fruit, foliage, or stems
To control plant growth
as possible to create the nourishment required for strong root development. But if you notice dead or broken branches, tree labels, or branches competing with the ladder, you can prune them near the tree trunk. When shrubs and trees are three or four years of age, they can be pruned throughout the following years to make an appropriate shape and expand flowering and foliage. Root development should be strong to stay in the tree and feed the branches
2- Use proper pruning tools
When pruning your trees and shrubs, select tools that will carry out the good job, keep a sharp edge, and are easy to deal with. Great pruning gear will make exact cuts and do a great job. When pruning is done, store your gear in a dry room. Pruning Tips: When pruning infected trees or shrubs, clean observed sharp edges and pruning shears after each slice to prevent spreading disease. Hand shears– Bypass type pruners have a scissor-type blade that is curved. Used to cut ¾ inches in diameter. Lopping shears– Cut branches that are up to 1 ¾ inch in diameter. It gives you extra reach and long handles with better cutting power. Pole pruners– Can reach branches that are twelve feet or more in height, cut out up to 2 inches in diameter. Hedges shears– Manual and power types. Saws– (pruning saws, chain saws) A variety depending on the needs

3- Avoid pruning new trees and shrubs

If you have youthful or recently planted trees or bushes in your yard, avoid pruning them for the 1st couple of years. New plants need as many leaves

as possible to create the nourishment required for strong root development. But if you notice dead or broken branches, tree labels, or branches competing with the ladder, you can prune them near the tree trunk.

When shrubs and trees are three or four years of age, they can be pruned throughout the following years to make an appropriate shape and expand flowering and foliage. Root development should be strong to stay in the tree and feed the branches.

4- Make Proper Pruning Cuts

Most varieties of trees have a single stem, so find the best header branches before you start pruning. Cut all defected branches before you start pruning to shape the tree. If you have huge or tall trees, use a pole pruner for high branches.

In case you’re pruning a little branch, make the cut at a horizontal bud if conceivable. Neat cut at a slight edge around 1/4-inch beyond the bud For bigger branches, cut outside the branch neckline and branch bark edge, but don’t leave a distending stub. So if the limbs are small and haven’t framed a furrowed neckline, cut close

5- Remove dead or damaged branches

If your shrub and tree have frail, harmed, or dead limbs, cut them off. They can be pruned regardless of the developing season.

Appendages and branches that are dull or colorless completely through sign dead wood, but green indications of the colored signs of life.

If branches give green development signals, it’s ideal to check the best possible pruning time for that variety of shrub and trees to avoid causing damage.

6- Clean your pruning gear

It is important to sanitize your tree pruning gear that you keep away from cutting into ulcers and unhealthy portions of trees and shrubs, it is perfect to be protected and sanitize your pruning instruments with scouring alcohol or any nuclear cleaner after each cut of an infected tree. You should plunge or rub the sharp edges with a disinfectant- impregnated material after the pruning of a healthy tree is done, and before you move to the following tree or growth

7-Prune at the right time

Commonly, most property holders prune when it’s helpful for them, but that may not be the best time for the trees and bushes.

In case you’re removing branches or limbs that are frail, interlaced, harmed, or dead, pruning should be possible at any time of the year, but strong trees and shrubs should be pruned at specific occasions, depending upon the species.

Pruning and trimming at a wrong time can cause harm that results in hindered development, powerless appendages and branches, poor foliage development, and fewer flower creation.

Normally, pruning in pre-spring when most trees and bushes are shapes is ideal.

This is good before spring development starts, so any pruning missteps or wounds are exposed for a short timeframe. It’s likewise simpler to look at the plant structure when branches are uncovered.

8-Pruning evergreen shrubs and Trees

Evergreen shrubs and trees fall into two classifications: needle-bearing and broadleaf.

So it’s ideal to prune evergreens in late-winter after new development starts, but the specific pruning time may fluctuate with the plant assortment.

If the trees and bushes are blooming varieties, similar to azaleas, magnolias, and rhododendrons, or assortments that produce colorful berries, similar to holly shrubs, hold up until they quit blooming, so you can enjoy the blossom.

9-Pruning flowering shrubs and trees

Spring-blooming shrubs and trees should be pruned after their flowers start to die. These plants ordinarily sprout on last year’s growth.

Summer-blooming and fall-blooming shrubs and trees should be pruned in pre-spring or late-winter. These plants sprout on the present year’s development.

10-Topping Vs. Thinning

Sometimes trees are “topped” to diminish the size or to revive growth.

At the point when a tree is topped, the height is chopped down from the top. Topping isn’t recommended from many expert arborists, for a few reasons.

After a few months, regrowth on a topped tree develops at a fiery pace with thick and upstanding development. It can easily breakdown during extreme rain or wind storms, regular in Northern areas.

It also affects the tree’s structure and appearance and makes it progressively vulnerable to creepy crawlies and disease, resulting in a shorter life for the tree.

Thinning is a superior method for decreasing the size of a tree or restoring development.

Thinning a tree returns it to its regular branching before development and results in an increasingly open tree that emphasizes the tree’s unique structure.

Additionally, thinning makes the tree stronger by compelling the diameter across the development of the remaining branches.

A quick look of tree trimming and pruning services

Tree trimming and Pruning services help trees with getting strong and look perfect and engaging. One prunes a tree to clear hurt branches, think about the new turn of development, or make a specific shape. It’s important to do it adequately, so you don’t end up hurting the tree.

Buy the best pruning tool you can manage the expense of and keep them in incredible condition.

Starting with new and innovative tools in front of the market that is perfectly helpful to a property holder.

Pruning large trees can be dangerous, due to heavy limbs and branches and the height of the trees. If you have a large, mature tree in your landscape, pruning should be done by experts

Contact us 516-9031082

Cheap Tree cutting service Near me

AAA Trees on March 15, 2020

Cheap Tree Cutting Near Me

If you have a tree that needs to be cut down, you want to find a good price. You should get a few quotes and compare them.

Typically, the cost to remove a tree depends on its size, condition, and location. Several other factors may also impact the cost.

How to Find a Cut Above

One of the best ways to find a cheap tree cutting near me is by using the internet. You can find many websites that list local tree companies by zip code, and you should also use search engines to check out reviews from previous customers.

If you are in the market for a new tree company, the first thing you should do is to get 3 quotes from reputable providers. It is also a good idea to look for tree service referrals from friends, neighbors and relatives who have recently had work done by the pros.

The most important factor

when it comes to choosing a tree cutting company is to make sure you are getting a quote that includes the price of the job itself and not just an hourly rate. Once you have that in hand, you can then figure out a payment plan.

To help you find the cheap tree cutting near me and save time and money, Movit has partnered with A Cut Above Tree Services to provide a free e-book that walks you through the process of choosing the right tree service for your home or business. It covers all the bases in a concise, easy to follow guide with plenty of pictures and videos.

Getting Started

Whether you have a dead tree that needs to be felled or one that has fallen and broken branches, it is important to hire professional tree services as soon as possible. This will ensure that the work is done quickly and efficiently, reducing your risk of damage to your property or a loved one.

Tree removal can be a costly and dangerous task, so it is important to do your research and choose the right professional to handle the job. You will want to find a reputable company that offers excellent customer service, high-quality work and an affordable price.

The cost of a tree removal

can vary based on several factors, including the tree’s condition and size. These factors will also have an impact on the contractor’s ability to complete the job safely and efficiently.

For example, if the tree is close to your home or another building, you may need a more expensive tree removal service because they will need to work in confined spaces and will need special tools and equipment. Additionally, if it is near or tangled in a power line, the tree will need to be cut down and handled carefully to avoid damage to utility lines.

This can increase the total

cost of the job by a significant amount, so you need to be aware of these factors and make sure that your chosen tree service is capable of completing the project as quickly and efficiently as possible.

It is also important to remember that it can be difficult for people to climb up a tall tree and rope down individual pieces, which means that the tree will likely need to be cut down into several sections. This can add an additional $1000 to $1,500 to the final price of a tree removal.

Similarly, if the tree

is a very large one, it can also require a large crew and more equipment to complete the job. This can increase the overall cost of a tree removal, but it can also make the work much faster.

The best way to find a good tree service is to compare prices online and ask for quotes from multiple companies. You can do this by using a free service Free Estimate like from AAA TREE SERVICE NY CORP It will help you to compare 3 top-rated tree removal companies and quickly match you with one that fits your budget.

Safety First

If you’re cutting down a tree, it’s important to know the safety measures that are necessary to avoid injury. A few simple steps can make a big difference in the safety of the job.

Before you start felling a tree, take a moment to check out the condition of the tree and the surrounding area. Look for signs of damage, such as broken or loose branches that could fall on you. You should also check the condition of nearby trees, bushes and fences.

In addition, make sure that the area is free of obstructions that may cause you to trip or hit your head. You should also clear away any brush that might block your view of the work site.

Once you’ve determined that

the tree is safe to cut down, it’s time to start. The first step is to make a back cut, which is a wedge-shaped cut at a 45-degree angle or more than a third of the way into the tree (Figure 1).

After you’ve made the back cut, you should begin to remove the limbs one at a time and trim them as close to the trunk as possible. This will create a natural collar that forms at the fork of the limb, which will help control the direction and rate of fall.

If you’re not experienced in felling

it’s a good idea to get some training from an arborist before you try your hand at it. This will ensure that you’re doing it safely and don’t injure yourself or others around the area.

As you work, make sure you’re wearing a hard hat that meets ANSI Z89.1-1986 standards, as well as gloves to protect your hands from flying branches and other hazards. Gloves can also provide a better grip on your chainsaw.

The most common injury from tree trimming

and removal is falling limbs. The best prevention is to keep a lookout at a distance and establish escape paths in the event of an unsafe fall.

The lookout should be able to signal when the job has become dangerous by tapping the person who is felling the tree on the shoulder. If they see a problem, the lookout will then tell you to leave the tree and move quickly to an escape path.

Getting a Quote

Getting a quote is the first step to finding the right tree cutting service near me. The cost will depend on a number of factors, such as the size and condition of the tree, its location, and whether or not you’ll need to hire a licensed arborist to trim it.

If you have trees that are interfering with power lines, your local utility company will handle this job at no charge. If you’re dealing with a hazardous tree, however, you may need to hire a professional to remove it.

Another factor that can affect

the price is the height and diameter of the tree. Taller and thicker trees will require more labor and equipment to trim, so it will cost more.

The cost of a tree trimming job can also be affected by your region’s cost of living, local competition, and the type of trees on your property. Some professionals will give discounts for groups of trees, such as if you have multiple trees in one yard or on several properties in the same area.

Many companies will also

include a price for hauling the tree debris away and disposing of it, or chipping it onsite. This service is worth requesting, because it can save you money by not having to pay to dispose of the wood.

You’ll also want to make sure the company you choose is insured. This can be a big deal forTree Cutting Service Near Me , particularly if they’re using heavy equipment to cut down the tree.

Don’t be afraid to ask for a copy

of their insurance certificate or a typical contract before they begin work. This will protect you from any accidents or issues that may arise later, and help you find the best tree cutting service near you for your needs.

The most expensive tree removal is usually poplars, which can cost $1,500 to $2,500. This is due to their tall size and extensive root systems, so they take a lot of effort to cut down and remove. this article Share Just some ideas Best Thing is Get estimate in person To Get exact price

https://youtu.be/-5jwBPMs6AE

tree cutting service 🎄 🔥🔥🔥 in 😊😊 🪓🪓 🪓 Great Neck New York #treeservice (https://youtu.be/-5jwBPMs6AE)

Contact Us At 516-9031082 and 631-9931039

Tree Removal Guide Steps about Tree Cutting

AAA Trees on September 1, 2019

BEST TREE REMOVAL TIPS There might be a need for you to replant a tree in another spot or remove a dying tree completely. If this need ever arises, there are ways to go about it, and the most important thing is to go about the removal safely while following the right steps. Removing trees improperly can be hazardous to lives and properties. This is why you should take the appropriate precautions during your tree removal process, even without hiring a professional. We will highlight the steps to follow, and with the right tools, you will be able to remove your tree without hitches.

1- Have safety equipment around you

To safely cut down or remove s tree, you should put things in place to keep yourself safe throughout the process. The following tools are important to have before you fell the tree.

Helmet and safety goggles

Hearing protection or earmuffs.
Respirator
Gloves
Long-sleeved clothing.
Protective Chaps if you’re removing larger trees.
Leather boots with steel toes and ankle support.

2-Clear the area around

the tree Make sure there are no children and pets with the tree’s surroundings. Also, inform the adults around about your intended tree felling activities so that they can stay clear of the area. Nobody should be within a distance of at least double the height of the tree. While you are clearing the area surrounding the tree, you should mark the direction where the tree is likely to fall naturally. If the tree is leaning to the right, when cutting, make sure you chop it in a way that it will fall to the right. Another thing that you should do before you start cutting is to work out an escape route in case of an emergency. Plan two routes to ensure your safety.

3-Make a cut into the side of the tree

Make an angled cut with an ax or saw into the tree towards the direction you would like the tree to fall. Keep cutting till you get to a quarter of the diameter of the tree.

4-Turn the saw to the side and cut horizontally

Cut through the tree at a flat angle to maintain an even cut. When you have created a hinge of about a tenth of the diameter of the tree, stop cutting.

5-Allow the tree to fall

After leaving the hinge, remove the ax or saw and make your way to your escape route. Stay away from the tree until it falls completely to the ground. Should the tree fall towards you, make a run for your second escape route.

6-Removing the tree stump

If the tree you feel is a small tree, you can remove the stump with a shovel. Dig it out to expose the roots and then cut off the roots with a root saw or an ax. If you wish to recycle the roots, compost them.You can also use a chemical to remove the stump or burn it if your environmental laws permit you to do so.

CONCLUSION

There you have it; six tree removal steps if you want to remove a tree by yourself. If you follow the steps, you should have no problems with removing a tree. And of the tree is too much for you to handle, hire a professional.

Tree Service Free Estimate Contact Us at 516-9031082

Tree Removal Related Tips

Tree removal Cost Average & palm tree 2023

AAA Trees on January 15, 2019

Tree removal Average cost Cut Down a Tree Trimming, Pruning Estimate Why is Tree Removal Important Factors to Consider Before Removing a Tree What is the Average Cost of Tree Removal?

are indeed a life saver. Trees are known to provide an improved air quality and oxygen to humans, conserve water, preserve soil, and support wildlife by providing shelter to these animals and also

climate amelioration

It is however important to note that as beautiful and helpful as these trees can be, they could turn out to be a threat to human life and property if they become diseased, infected, damaged, has its branches growing over a power line or property, or falls during a heavy storm. This is the stage where a quick removal is advised to be the best option. At these stage, it is not advisable to do it on your own you need a professional Tree service company who would do a perfect removal.

Why is Tree Removal Important

Trees that have lived over a long period of time have the tendency of becoming really weak. The older they become the more tendencies they have to start to rot. Their roots, branches and barks begin to rot. They could fall even at the slightest drop of rainfall and wind. They become threats to human life and property. Damages to property should be avoided, therefore a total removal of the trunk appears to be the only solution. Similarly, in times of heavy storms, weak and decaying trees are liable to fall.

Also, a tree with rotting roots

is not only dangerous but it could also cause harm to the concrete flooring around the spot it was planted. This will surely result in an additional expense which is definitely going to be an unwanted addition to your budget. Also dried leaves and branches are easy attractions to forest fires. Similarly they may spark fire during lightning strikes. A professional Tree service company is a life saver in

situations like this. They help protect

your family and neighbors from any potential threats related to trees. You would be charged lesser than you would eventually have to pay in case of property damage if trees are not removed as at when they should. The tree service company shows up within moments of getting in touch with them. They come fully equipped with machineries and tools for effective and efficient service delivery.

Factors Considered When Determining the Cost of a Tree Removal:

To some degree, most factors are usually tied with how they influence the amount of time needed to complete the tree removal process. For dangerous jobs, more time is needed to complete; also trees located in poor spaces will require more time to remove, so also will trees that are above homes, pulleys and arborists blocks would require the use of lowering ropes with arborist blocks and pulleys. This would definitely take more time and also cost more. Jobs that require the use of heavy machinery like cranes would also cost more than regular jobs. The following however, are the breakdown of factors to consider when determining the cost of a tree removal. price

Using a Tree Removal Cost Calculator

Before you hire a tree removal company or do anything else with regards to a tree in your yard, you should make an accurate calculation of tree removal cost. This will allow you to properly budget for the job and not overspend. There are many online calculators you can use for tree removal cost; they

will give you an idea of

what you need to do to estimate tree removal cost. These online tree removal cost calculators will give you a range of different prices to give you an idea of how much it will cost near you. It is also important to keep in mind that all tree removal jobs are different depending on the area you live in. You have to make sure you understand what type of tree you will be removing before calculating any costs.

If you live in a small town

where there is only one tree per acre, you will obviously need to remove the tree yourself. If your house is on a large piece of property, and your tree is less than one hundred feet tall, you will most likely need to hire a tree removal company to take care of it for you. In most cases, tree removal companies

will use a combination of chainsaws

hammers, chisels, and power saws to cut down trees that are more than one hundred feet tall. If your tree is more than one hundred feet tall, they may also use a piece of heavy equipment called a trimmer to cut it down to a certain height. The average tree removal cost near me will usually range from one hundred fifty to two hundred dollars, depending on the severity of the tree removal process.

Even if your tree is smaller

than this, you still need to use a tree removal cost calculator in order to determine how much it will cost you. Using these tree removal prices online will help you determine what options you have available to you. Do you need the service of an expert? Are you comfortable removing a tree by yourself? If so, these calculators will help you determine whether you can afford to do so or not.

1) Size of the Tree:

The larger the tree, the more the time it would take to fully remove. This would require more manpower and would definitely cost more.

2) Location of the Tree:

Another big factor is the location of the tree. The branches and leaves are usually placed into a wood chipper after which the word chipper shoots the chips into the back of the chip truck. Usually, the truck and chipper should be positioned together but in instances where the tree is next to a home of a backyard, the debris would have to be dragged down to where the truck and wood chipper is positioned. This would result in more work time and an increase in the price of the job.

3) The Risks Associated with the Removal:

Another reason tree removal services for residents are so expensive is due to the risks of the job and the costs associated with the risks. The costs associated with risks include costs of insurance, specialized equipment with which the job or task will be carried out and necessary training one must undergo to become a professional. Having said that, some jobs are considered as been more hazardous than others. Jobs in these category take more time to complete and they usually require the use of specialized rigging techniques and equipment.

4) Will the job Require Rigging Techniques during Removal?

“Rigging” is the use of ropes, pulleys and other specialized equipment to secure branches and sections of wood (usually sections of the trunk) before cutting them. Rigging allows the branches to be lowered to the ground in the safest means. Usually, these techniques are for large branches. These techniques would probably take more time thereby costing more.

5) The Condition of the Tree:

Before a tree service is carried out, the arborist makes proper checks on the condition of the tree. This helps him determine the best methods to use to safely remove the tree. If you want them to work on a dying, dead or decaying tree, you would be paying more money because it would require more

than the traditional method

of climbing the tree because since the branches are dried and decaying, the climber is at the risk of falling off the tree. It is advisable to contact an arborist immediately you start to see signs of decay so as to reduce the cost of paying more when the health of the tree declines even more by the day.

What is the Average Cost of Tree Removal?

$75 – $700 fee is paid by an average home owner to have a tree removed from his property average homeowner will pay between $75 and $700 to have a tree removed. The national average cost is $560. It should however be noted that there are four main factors that is sure to affect the cost of your tree removal: the size (height) of the tree, its condition, diameter and location.
Just as it has been stated above, the height of the tree can affect the cost of tree removal. Other factors that can affect the price include certain species and whether or not the tree has fallen. The following are the average costs of tree removal depending on the size of the tree:

Small Tree Removal

To remove a small tree, it costs approximately $70 to $250 on average. Small trees are usually about 20 feet high, it would cost less to remove but more if there is a need to transplant it. The right direction will then need to be chosen. To save cost, you can dig a hole ahead of time. Always make sure to call the utility company to know if there are any pipeline works under or near the tree before removal so that proper precautions can be taken to avoid damages.

Medium Tree Removal

The average cost to remove a medium tree is $ 1500 to $3000 and varies by height, which could range anywhere between 30 and 60 feet. You would have to pay additional expenses like removing the stump, getting rid of any debris, branches, leaves, as well as cleanup fees. When you speak to the professional, be sure to ask if they charge per tree or per hour, as this could widely vary what price quotes you get per arborist you call.

Large Tree Removal

To remove a large tree on an average costs approximately $3000 to $5000 .large trees ranges from 60 to 80 feet tall and definitely requires more work.
• Very Large Tree Removal
The average price to remove a very large tree is around $500 to $1400. This is because very large trees can be 80 to 100 feet tall or more. They are the most complicated to remove. They require more equipment and therefore cost more.

Palm Tree Removal

To remove a palm tree is approximately $300 to $1200 if their height is 30 feet. If they’re 80 feet tall or more, you are likely to spend $1,100 to $1,500 to have the tree professionally felled. Palm trees have to be roped instead of simply cutting them down because they have teeth. The taller the palm tree gets, the more weight they have. This means their roots are enduring a lot of stress and can eventually break, falling down into the yard’s fence or your home.

Pine Tree Removal

The average price to remove a pine tree is relatively around $1700 for a 40 feet tall tree, but for the 80-foot pine trees, it will cost about $4000. This is because of the work and potential danger involved. There could be additional work involved with removing the branches and cones depending on the breed of pine tree involved. Professionals have to wear a lot of safety gears to avoid scratches and eye contacts with spines while cutting.

Oak Tree Removal

Oak trees reaches up to a height of 60 feet. The average cost to remove an oak tree is approximately $2000 to $8000. Oak is a even more difficult tree take down due to its very strong wood. Factoring in its strength and girth, professionals will use heavy-duty equipment to fell the tree. It just depends on the species of oak you have and how tall it is.

Fallen Tree Removal

The average price to remove a fallen tree is about $50 to $100 depending on the size and species of the tree. Fallen trees are less expensive to remove because a lot of the work is already done. You might pay additional costs to have the pieces hauled away. If the tree needs to be pruned, branches removed before cutting it into pieces you will pay more for that service as well. If you want to have the stump removed where the tree broke off, that will cost an additional $50 to $100, depending on its girth and whether you have it grind or completely removed.

Average Prices For Extra Services

Whenever a tree removal service is hired, be sure of what they are gong to do. Never should you assume that tree removal would automatically include cutting up and hauling away. Most times, these services come with an extra charge. Stump removal is not always part of the deal unless otherwise stated. Below are some of the general idea of what extras cost: you hire a tree removal service, you’re going to want to be sure of what they’re going to do. Don’t assume that tree removal also includes cutting it up and hauling it away. In fact, that is often an extra charge. Also, unless otherwise stated, stump removal is not always part of the deal. Here are some general ideas of the cost for extra services:

Stump Removal:

After your tree has been cut down, the stump will remain unless you pay extra to have it removed. You are then charged based on the amount of stumps you want to have removed. Other factors that could affect the price include the age of the stump, the condition of the soil, the root system, and the hardness of the wood. Here are some examples of some general costs, not including cleanup:

Diameter:

Most tree removal services charge about $2 to $3 per inch while some would charge a minimum of $100.

Per Stump

Some tree removal services will charge a certain amount for the first stump, around $150 for example, and a lower rate for each extra stump, such as $50.
Clearing Land: if there is a piece of land you want to have cleaned with lots of stumps to remove the cost is around $150 on an average per hour.
Trimming/Cutting: Prices range from $55 to $600 depending on the size of the tree with an average between $85 and $300.

Chipping

The cost of chipping averages from $100 to $200 small Pile Branches
Removal: removal of limbs can add an extra $50 on average.
Log Splitting: Breaking the logs for firewood is often an extra charge, usually about $75 to 150 Small Tree Logs
Travel: A tree removal service will charge extra for travel. This varies widely, so it’s impossible to give an idea of the cost. It is safer to have your tree inspected after a heavy rain, wind or storm. The worst time to pay for tree services is after the damages have been done.

Tree service Estimate Contact Us Here

Estimate Number of Trees in New York

AAA Trees on March 11, 2018

Do you know New York is the most populated city in the United States? Hopefully, the ecological balance is strong enough with the balance of water, Trees, and density of population. If you want to know the estimated number of trees including forest area, locality or metropolitan area have the balance still now. If you want to know it better you have to know the Estimate Number of Trees in New York.

Not to mention, The New York City

covers 468.484 sq miles including 302.643 sq. miles of land and 165.841 sq. miles of water. Notably, the metro area of New York City spreads 13,318 sq. miles. In average the density of popular is 28,210/sq. miles which are 10,890/ km 2. Now I will explain the Estimate Number of Forest area, density or Trees following the research and stats from Department of Forestry NY State and The Million Tree Project.

Estimate Number of Trees in New York:

If you see the below list of Trees in the New York, you will get the complete sense. In general, the total Trees in the New York City is 5.2 million. So, if you make the average it will be 25 trees or 24% in the Per Acre.

On the other hand, in the forest area where you can consider 100% of trees, it will be 63%, though the report has been added including the village area. Rest of the areas are urban and the estimated number of trees are 37% and it acquires 106 trees per acre. The spilled density of the trees is 30.2

million acres.

In addition, you will see 100+ species of trees in the whole new York state. The publicly owned forest or gardens are 3.7 million acres and privately owned gardens are 76%. They are using the forest land or privately owned land. Hopefully, the contribution in the economy is very satisfactory from the New York City Forest or Trees. It is nearly $14 billion. The common forest types are maple/beech/birch which has covered 53% of forest land area.

Trees in New York (At a glance)

The below list has been made according to the overall stats of the Trees and Forest in the New York.

Total Trees: 5.2 million
Per Acre Trees: 26 trees (24%)
The Density of Trees: 30.2 million acres
100% Trees or Forests: 53% to 63%
Trees in Urban Areas: 37% (106 trees per acre)
Species of Trees: 100+
Estimated Income: $14 Billion

Not to mention, 1.6 billion people are living in the forest area and it is the total of 31% of the global land area. So, the amount of forest area in the New York city keeping the equality.

Sources: Department of Forestry NY State and The Million Tree Project.

Want to Know More?

Considerably, the estimated number of trees in New York are high and the yearly contribution to the economy is very helpful. For this reason, it is a good reason for coping with the ecological balance and increasing the per .

If there any Question Related about Trees tips average Trimming and Tree removal cost of Tree service near You Property in New York or long island Contact our team Also share How Get estimate on tree removal if You leave in new York or Long Island NY Here are some more Related Tips

Keep reading

Factors to Consider When Getting a Tree Removal Estimate

There are several different methods for getting a tree removal estimate. You can get a quote online or call local companies to get a free estimate. However, there are some factors to consider before you choose a company. For example, the type of equipment and accessibility of the tree will affect the final cost. The more trees you need to remove, the higher the cost will be. If there are active power lines nearby, a crane may be needed. If the tree needs emergency removal, you’ll need a more expensive tree removal estimate.

The average cost of removing a tree in New York

is about $1,660. This can vary depending on the circumstances of the project. The higher end of the range will be higher than the lower. The amount you’ll pay will depend on the size and condition of the tree. A 30 foot tall tree will cost between $400 and $600 to remove, and an 80-foot tall one will cost around $2,700.

The cost of tree removal depends

on the type of tree and its location. For instance, if the tree is in an area that is close to a structure, the cost will be higher. If the tree is in an area with limited access, you may need two workers to safely remove the tree. This will add another $100 to $150 to your total. You should keep these considerations in mind when determining the price for your project.

Another factor to consider is the location of the tree. The cost for removing a tree near a building or a power line will affect the price of the work. Additionally, trees that have more than one trunk will require special accommodations. These factors will influence the cost of the project. If you’re looking for an estimate for the removal of a single tree, then it’s important to get a free estimate before you start the project Number of Trees in New York

The size and location of the tree

can also affect the cost. The larger the tree, the more expensive the work will be. If you are removing a large tree, you will need two workers. A small tree may only require one worker. A large one, however, requires a bigger crew. If the tree is near a building, you will need to pay for a service that will grind the stumps.

The location of the tree

is the most important factor when getting an estimate for the removal. The higher the tree’s height, the larger the total price will be. Some companies charge extra for log splitting because they need to transport logs. For example, you can’t afford to pay a full $1,500 for a tree. If the removal company doesn’t bring the equipment, they will charge you an additional $100 to $150 for the service.